Integration Examples¶
Veronte Autopilot 1x and Veronte BCS¶
An Autopilot 1x can communicate with a BCS or another Autopilot 1x. Usually, BCS are used as ground stations to control autopilots.
“Ground” stations manage remote communications with “air” stations, which are mounted in an aircraft.
An SDL configured as “ground” sends continuosly messages to establish connection with “air” stations, “air” stations do not send any message until they receive messages from “ground”, then they start to send and receive data each other.
To establish communication between an SDL and an Autopilot 1x (or a BCS), both devices require configuration. This configuration for an Autopilot 1x (or a BCS) can be read on the External radios - Integration examples section from the 1x PDI Builder user manual. The SDL is configured with AT commands (read the How to configure SDL section to know more). Click on the links of the following table and use the listed AT commands according to the application requirements.
Variant |
Ground |
Air |
SDL04 |
||
SDL09 |
||
SDL24 |